阿坝州人民政府关于印发阿坝藏族羌族自治州实施《阿坝藏族羌族自治州实施四川省世界遗产保护条例的条例》的办法的通知
四川省阿坝州人民政府
阿坝州人民政府关于印发阿坝藏族羌族自治州实施《阿坝藏族羌族自治州实施四川省世界遗产保护条例的条例》的办法的通知
阿府发〔2008〕4号
各县人民政府，州直各部门，卧龙管理局：
《阿坝藏族羌族自治州实施〈阿坝藏族羌族自治州实施四川省世界遗产保护条例的条例〉的办法》已经十届州人民政府第15次常务会议通过，现印发，请遵照执行。
二○○八年二月二十九日
阿坝藏族羌族自治州
实施《阿坝藏族羌族自治州实施〈四川省
世界遗产保护条例〉的条例》的办法
第一章 总 则
第一条 为了加强对阿坝藏族羌族自治州（以下简称自治州）辖区内世界自然遗产的保护、利用和建设管理，根据《四川省世界遗产保护条例》、《阿坝藏族羌族自治州自治条例》、《阿坝藏族羌族自治州实施〈四川省世界遗产保护条例〉的条例》及相关法律法规，制定本办法。
第二条 本办法所称世界自然遗产是指联合国教科文组织批准的九寨沟世界自然遗产、黄龙世界自然遗产、四川大熊猫栖息地世界自然遗产（包括卧龙、四姑娘山、 木耳寨、三江、草坡、毕棚沟）。
自治州辖区内世界自然遗产地的保护、利用、建设管理适用本办法。
世界自然遗产地内的一切单位和个人应当遵守本办法。
第三条 世界自然遗产的保护实行科学规划、统一管理、合理开发、永续利用的原则，保证世界自然遗产的完整性、真实性。
第四条 州、县规划建设行政管理部门是世界自然遗产的行政主管部门，负责全州世界自然遗产保护、利用和建设的监督管理工作。
文化、林业、环保、国土资源、水利、民族、宗教、旅游等部门按照各自的职责，依法做好世界自然遗产保护利用的相关监督管理工作。
第五条 自治州辖区内世界自然遗产实行州、县共管，以州为主的管理体制，州人民政府设立的遗产地的遗产管理机构负责九寨沟、黄龙、四姑娘山、卧龙世界自然遗产的保护、利用和管理工作，汶川县、理县、小金县人民政府及其职能部门负责汶川三江、草坡、理县毕棚沟、小金木耳寨世界自然遗产地的保护利用和管理工作，州人民政府世界遗产行政主管部门对世界遗产保护、利用和管理工作进行监督。
第六条 九寨沟风景名胜区管理局、黄龙风景名胜区管理局、四姑娘山风景名胜区管理局、卧龙自然保护区管理局是州人民政府设立的世界自然遗产地管理机构，实行“两块牌子，一套班子”的管理模式，履行州人民政府赋予的权力和职责，具体负责世界自然遗产的规划实施、保护利用和管理。汶川县、理县、小金县成立相应管理机构，负责汶川县三江、草坡、理县毕棚沟、小金县木耳寨世界自然遗产地的规划实施、保护利用和管理。
第七条 世界自然遗产地管理机构的职责：
（一）宣传贯彻国家有关法律、法规、规章和政策，负责组织本办法的实施；
（二）负责对世界自然遗产资源、自然生态环境实行统一保护和管理，制定并组织实施保护措施和管理制度；
（三）根据批准的《风景名胜区总体规划》或《自然保护区总体规划》，组织编制和实施世界自然遗产地的详细规划，科学保护和利用世界自然遗产资源；
（四）负责处理好世界自然遗产保护区范围内居民生产、生活与保护的关系；协调好受损群众的补偿、产业结构调整、就业、致富等对保护有利的工作；
（五）会同有关部门，负责对世界自然遗产保护区范围内的商业、服务业和其它行业的生产经营依法进行管理；
（六）会同有关部门搞好世界自然遗产地的交通、通讯、电力、供水、供气等基础设施建设，改善游览设施，提高旅游接待能力和服务水平；
（七）负责世界自然遗产游览区范围内的安全管理工作；
（八）负责世界自然遗产地有关资料的收集整理和档案管理；
（九）有关行政主管部门委托的行政执法职能；州人民政府赋予的其他职能。
第二章 保 护
第八条 任何单位和个人不得破坏世界自然遗产资源。世界自然遗产地应当严格控制开发强度，防止过度开发建设。在珍稀资源周围，除必须的保护设施外，不得增建其他工程设施，完整地保持其原有的自然和历史文化风貌。
第九条 世界自然遗产地内的各项建设，应当与世界自然遗产地保护内容相协调，不得破坏世界自然遗产资源、环境景观，污染环境。
第十条 世界自然遗产地内的自然景物、特殊地质地貌、珍稀动植物、古树名木、文物古迹、河流、水域等重点保护对象，必须划定明确的保护范围，进行严格保护。
严禁在世界自然遗产保护区内开山采石、挖砂取土、毁林开荒、围湖造田、建墓立碑、开采矿产资源等破坏自然遗产资源和环境的活动。
第十一条 林业等相关行政管理部门应当加强对世界自然遗产地的林木、动植物资源的保护，保护自然生态系统的完整性，严禁乱采滥挖、乱捕滥猎各类野生动植物。
确需在世界自然遗产地内采集动植物标本、野生药材，必须经世界自然遗产管理机构同意，并经相关部门批准后，在限定的数量和范围内进行。
第十二条 林业、文化等行政管理部门应当严格保护古树名木、古建筑、革命遗址和文物古迹，并设立标志，建立档案，采取有效的防腐、防震、防洪、避雷及防治病虫害等保护措施，确保世界遗产的安全。
第十三条 世界自然遗产地内的居民应当服从世界自然遗产地管理机构的管理，义务保护世界自然遗产资源。世界自然遗产管理机构应当提供一定数量的工作岗位用于安置世界自然遗产保护区范围内的居民，对因保护世界自然遗产资源而受到损失的遗产地居民，遗产地遗产管理机构应从世界自然遗产保护专项经费中安排一定比例资金用于对居民生产、生活的补偿。
第三章 规划与审批
第十四条 世界自然遗产规划分为总体规划和详细规划。
第十五条 世界自然遗产总体规划应当根据遗产的性质、特点，按照世界自然遗产保护、展示、传承的原则进行编制。
第十六条 世界自然遗产地属国家级风景名胜区或者国家级自然保护区的，其《风景名胜区总体规划》或《自然保护区总体规划》可作为世界自然遗产总体规划，其《风景名胜区详细规划》或《自然保护区详细规划》可作为世界自然遗产详细规划。
第十七条 世界自然遗产地属国家级风景名胜区或国家级自然保护区的，其总体规划和详细规划按《风景名胜区条例》、《自然保护区条例》和《阿坝藏族羌族自治州实施〈四川省世界遗产保护条例〉的条例》的规定进行编制和报批。
第十八条 世界自然遗产规划经批准后，应当向社会公布，任何组织和个人有权查阅；在规划区内的单位和个人应当遵守批准的规划，服从规划管理。
第十九条 经批准的规划需要进行修编的，应当报原审批机关批准。总体规划的规划期满前2年，规划编制机关应当对规划进行评估，作出是否重新编制规划的决定。
第四章 建设
第二十条 世界自然遗产管理机构应当按照规划进行建设，根据财力、物力，积极开发、利用世界自然遗产资源，逐步改善保护设施和游览条件。
第二十一条 世界自然遗产地内土地利用和各项建设必须符合规划。建设项目实行建设工程选址意见书、建设用地规划许可证、建设工程规划许可证制度。
在世界自然遗产核心区内，除按照总体规划进行建设外，禁止其他一切建设。
在世界自然遗产核心区、保护区内，按照总体规划进行建设的项目，由遗产管理机构按照总体规划提出选址意见，经所在县人民政府审查，报州人民政府规划建设行政主管部门审核同意后，报省建设行政主管部门审批。
在世界自然遗产外围保护区内的重大建设项目，由遗产管理机构，按照总体规划提出选址意见，经所在县人民政府审查，报州人民政府规划建设行政主管部门审核后，按照有关规定报批。
第二十二条 世界自然遗产核心区、保护区、外围保护区内建设项目的建设用地规划许可证、建设工程规划许可证由遗产所在地县人民政府规划建设行政主管部门核发。
世界自然遗产地内集镇规划区范围内的建设项目按照《中华人民共和国城乡规划法》和《四川省〈城市规划法〉实施办法》的规定执行。
第二十三条 世界自然遗产地内已建的设施，由当地自然遗产管理部门区别情况进行清理。凡属污染环境，破坏景观和自然风貌的，应当限期治理或逐步迁出，迁出前不得扩建、新建设施。
第二十四条 在世界自然遗产地内的建设项目（包括新建、扩建、改建的建筑物），其布局、高度、体量、造型、色彩等应当与周围环境相协调，并体现民族建筑风貌。
第二十五条 在世界自然遗产地内进行工程建设的建设、施工单位必须采取有效措施，保护好周围景物、水体、地形地貌和林木植被，工程竣工后必须及时清理现场，恢复毁损的地貌和植被，减少对环境的影响。
第五章 管 理
第二十六条 任何单位和个人不得以任何名义和方式出让或变相出让世界自然遗产资源。
第二十七条 世界自然遗产地内从事各种活动的单位和个人，必须遵守世界自然遗产地遗产管理机构的管理制度，服从管理。
第二十八条 世界自然遗产管理机构，按照世界自然遗产总体规划确定的旅游环境容量，合理安排和利用世界自然遗产资源开展游览经营活动。
严禁在世界自然遗产地内开展与自然资源保护不一致的游览经营活动。
第二十九条 世界自然遗产地遗产管理机构，应当根据遗产地的实际情况，会同相关部门制定机动车辆管理办法，对在世界自然遗产地核心区内行驶的机动车辆、非机动车辆实行总量控制，严格管理。
第三十条 世界自然遗产所在地的遗产管理机构，按照批准实施的世界自然遗产总体规划，对保护区范围内的常住人口增量进行控制。
第三十一条 世界自然遗产地的收入管理：
世界自然遗产地的收入应当由州或县人民政府统一安排使用。州或县人民政府应当在门票收入中提取世界自然遗产保护专项经费，用于世界自然遗产的保护、管理、科研和对世界自然遗产地内居民生产、生活的补偿。提取标准由各遗产地管理机构根据遗产地具体情况报州或县人民政府审批。
第六章 法律责任
第三十二条 违反本办法规定的，应当严格依照国务院《风景名胜区条例》、《四川省世界遗产保护条例》和相关法律、法规的规定处理。
第七章 附 则
第三十三条 世界自然遗产的规划、建设、保护、管理等，本《办法》未作规定的，按照相关法律、法规的规定执行。
第三十四条 本办法由州规划建设行政管理部门负责解释。
第三十五条 本办法自发布之日起施行。
工业产品质量责任条例(附英文)
国务院
工业产品质量责任条例(附英文)
1986年4月5日，国务院
第一章 总 则
第一条 为了明确工业产品（以下简称产品）质量责任，维护用户和消费者（以下简称用户）的合法权益，保证有计划的商品经济健康发展，促进社会主义现代化建设，特制定本条例。
第二条 产品质量是指国家的有关法规、质量标准以及合同规定的对产品适用、安全和其它特性的要求。产品质量责任是指因产品质量不符合上述要求，给用户造成损失后应承担的责任。
第三条 国家标准化部门负责制定全国统一的国家标准。国家标准应不低于国际标准水平。国家标准可以分级分等。企业主管部门要规定生产企业达到国家标准最高等级的期限。国家物价部门按标准等级，实行按质论价。
第四条 产品的生产、储运、经销企业必须按照本条例的规定，承担产品质量责任。各部门、各地区，特别是企业主管机关必须对产品质量进行管理，监督有关企业坚持质量第一的方针，保证产品质量，承担质量责任；管理和监督不力的也应承坦连带责任。
第五条 质量监督机构、工商行政管理机关必须对产品质量进行监督，维护用户的利益。
第六条 产品的合格证、说明书、优质标志、认证标志等都必须与产品的实际质量水平相一致。产品广告中关于产品质量的说明，必须符合产品的实际质量。
第七条 所有生产、经销企业必须严格执行下列规定：（1）不合格的产品不准出厂和销售；（2）不合格的原材料、零部件不准投料、组装；（3）国家已明令淘汰的产品不准生产和销售；（4）没有产品质量标准、未经质量检验机构检验的产品不准生产和销售；（5）不准弄虚作假、以次充好、伪造商标、假冒名牌。所有生产、经销企业都不得用搭配手段推销产品。
第二章 产品生产企业的质量责任
第八条 产品的生产企业必须保证产品质量符合国家的有关法规、质量标准以及合同规定的要求。产品的生产企业必须建立严密、协调、有效的质量保证体系，要明确规定产品的质量责任。企业必须保证质量检验机构能独立行使监督、检验的职权；严禁对质量检验人员进行打击报复。
第九条 产品出厂，必须符合下列要求：（一）达到本条例第二条规定的质量要求，有检验机构和检验人员签证的产品检验合格证；（二）根据不同特点，有产品名称、规格、型号、成份、含量、重量、用法、生产批号、出厂日期、生产厂家、厂址、产品技术标准编号等文字说明，限时使用的产品应注明失效时间。优质产品必须有标志；（三）实行生产许可证制度的产品，要有许可证编号、批准日期和有效期限；（四）机器、设备、装置、仪表以及耐用消费品，除符合本条（一）、（二）、（三）项要求外，还应有详细的产品使用说明书。内容包括：产品的技术经济参数、使用寿命、使用范围、保证期限、安装方法、维修方法和保存条件、技术保养检修期以及其它有关产品设计参数的有效数据。电器产品，应附有线路图和原理图；（五）包装必须符合国家有关规定和标准。剧毒、危险、易碎、怕压、需防潮、不装倒置的产品，在内外包装上必须有显著的指示标志和储运注意事项。产品包装上必须注明实际重量（净重和毛重）；（六）使用商标和分级分等的产品，在产品或包装上应有商标和分级分等标记；（七）符合国家安全、卫生、环境保护和计量等法规的要求。
第十条 达不到国家的有关标准规定等级、仍有使用价值的“处理品”，经企业主管机关批准后，方可降价销售，在产品和包装上必须标出显著的“处理品”字样。违反国家安全、卫生、环境保护、计量等法规要求的产品，必须及时销毁或作必要的技术处理，不得以“处理品”流入市场。不得用“处理品”生产和组装用以销售的产品。
第十一条 在产品保证期限内发现质量不符合第二条要求时，根据不同情况，由产品生产企业对用户和经销企业承坦质量责任：（一）产品的一般零部件、元器件失效，更换后即能恢复使用要求的，应负责按期修复；（二）产品的主要零部件、元器件失效，不能按期修复的，应负责更换合格品；（三）产品因设计、制造等原因造成主要功能不符合第二条要求，用户要求退货的，应负责退还货款；（四）造成经济损失的，还应负责赔偿实际经济损失；（五）由维修服务或经销企业负责产品售后技术服务时，生产企业必须按售后技术服务合同，提供足够的备品、备件和必要的技术支援。
第三章 产品储运企业的质量责任
第十二条 承储、承运、装卸企业必须根据国家有关规定和产品包装上标明的储运要求进行储存、运输和装卸。
第十三条 承储、承运企业在产品入库储存或出库、产品承运或交货时，应按照国家有关规定，严格执行交接验收制度，明确质量责任。确属储存、运输、装卸原因造成产品损伤，承储、承运、装卸企业应分别承担责任，按国家有关规定，赔偿经济损失。
第四章 产品经销企业的质量责任
第十四条 经销企业在进货时，应对产品进行验收，明确产品的质量责任。经销企业出售的产品，必须符合本条例第七条、第九条的规定。
第十五条 经销企业售出的产品在保证期限内发现质量不符合第二条的要求时，应由经销企业负责对用户实行包修、包换、包退、承担赔偿实际经济损失的责任。
第五章 产品质量的监督管理
第十六条 各质量监督机构，按照国家有关规定，单独组织或者会同工商行政管理部门、各行业主管部门、企业主管部门，对产品的生产、储运和经销等各个环节实行经常性的监督抽查，并定期公布抽查产品的质量状况。企业必须如实提供抽查样品，并在检测手段和工作条件方面提供方便。除国家已有规定外，质量监督机构抽查产品，不准向企业收费，以保证监督机构的公正性。质量监督机构所需的技术措施费用和检测费用，按实际需要由国家或地方财政拨款解决。各级经济委员会负责对产品质量监督管理工作进行领导和组织协调。
第十七条 各级行业主管部门和企业主管部门负责本行业产品质量的管理工作，其职责是：在授权范围内，制定或参与制定有关产品质量标准以及有关规章制度，负责产品质量的监督管理，督促企业保证产品质量，完善质量保证系统；组织发放生产许可证。
第十八条 对产品质量实行社会性监督。用户可以向产品生产、储运、经销企业提出质量查询；社团组织可以协助用户参与质量争议的调解、仲裁，支持用户向人民法院起诉。
第十九条 用户按双方协议可以派出代表到生产企业对产品生产过程和产品质量进行现场监督。
第六章 产品质量责任争议的处理
第二十条 因产品质量问题发生争议时，有经济合同的，按《经济合同法》的有关规定执行；没有合同的，争议的任何一方都可提请有关的质量监督机构调解处理，也可向人民法院起诉。
第二十一条 对产品质量的技术检验数据有争议时，当事人或调解、仲裁机构可委托法定的质量检验单位进行仲裁检验，质量检验单位应对提供的仲裁检验数据负责。
第二十二条 除国家另有规定外，质量责任的仲裁请求和起诉，应从当事人知悉或应当知悉权益受损害之日起一年内提出。产品质量责任方愿意承担责任时，不受时效限制。
第七章 罚 则
第二十三条 企业产品质量达不到国家规定的标准，企业主管机关应令其限期整顿。经整顿仍无效者，企业主管机关应令其停产或转产，直至建议有关主管机关撤销生产许可证，吊销营业执照。在整顿期间，企业主管机关视不同情况，可扣发企业负责人和职工的奖金、工资。
第二十四条 生产、经销企业违反本条例规定，有下列行为之一者，由企业主管机关对企业负责人和直接责任者给以行政处分，由工商行政管理机关没收其全部非法收入，并视其情节轻重，处以相当于非法收入的15％至20％的罚款，直至由司法机关追究法律责任。（一）生产、经销掺假产品、冒牌产品，以“处理品”冒充合格品；（二）生产、经销隐匿厂名、厂址的产品；（三）生产、经销没有产品检验合格证的产品；（四）生产、经销国家已明令淘汰的产品；（五）生产、经销国家实行生产许可证制度而到期未取得生产许可证的产品；（六）生产、经销用不合格原材料、零部件生产或组装的产品；（七）生产、经销违反国家安全、卫生、环境保护和计量等法规要求的产品；（八）经销过期失效产品。罚没收入全部上交国家财政。
第二十五条 有质量监督抽查中发现生产和经销企业有第二十四条中列举的行为时，由质量监督机构按第二十四条规定处理。对于不符合本条例第九条第七项规定的，由质量监督机构监督就地销毁或作必要的技术处理，并令生产、经销企业在限期内追回已售出的不合格产品。违反本条例第八条的规定，对质量检验人员进行打击报复的，或质量监督、检验机构工作人员徇私舞弊的，由有关主管机关给予行政处分；情节特别严重的，依法追究刑事责任。
第二十六条 由于产品的质量责任，造成用户人身伤亡，财产损失，触犯刑律的，由司法机关依法追究当事人的刑事责任。
第二十七条 上述处罚，不免除产品质量责任方对用户承担的产品包修、包换、包退、赔偿实际经济损失的责任。
第八章 附 则
第二十八条 有关主管部门可根据本条例的规定，制定实施细则；进出口商品、军用产品及有特殊要求的产品的质量责任可由有关主管部门参照本条例的原则，另行规定。
第二十九条 本条例适用于所有全民、集体所有制企业，个体工商业经营者以及在中国境内的中外合资、合作、外资企业。
第三十条 本条例授权国家经济委员会负责解释。
第三十一条 本条例自一九八六年七月一日起施行。(附英文)
REGULATIONS ON QUALITY RESPONSIBILITY FOR INDUSTRIAL PRODUCTS
Important Notice: (注意事项)
英文本源自中华人民共和国务院法制局编译, 中国法制出版社出版的《中华人民
共和国涉外法规汇编》(1991年7月版).
当发生歧意时, 应以法律法规颁布单位发布的中文原文为准.
This English document is coming from the "LAWS AND REGULATIONS OF THE
PEOPLE'S REPUBLIC OF CHINA GOVERNING FOREIGN-RELATED MATTERS" (1991.7)
which is compiled by the Brueau of Legislative Affairs of the State
Council of the People's Republic of China, and is published by the China
Legal System Publishing House.
In case of discrepancy, the original version in Chinese shall prevail.
Whole Document (法规全文)
REGULATIONS ON QUALITY RESPONSIBILITY FOR INDUSTRIAL PRODUCTS
(Promulgated by the State Council on April 5, 1986)
Chapter I General Provisions
Article 1
The present Regulations are enacted in order to define the quality
responsibility for industrial products ("products" for short hereinafter),
safeguard the legitimate rights of the customer and consumer ("customer"
for short hereinafter), ensure the healthy development of commodity
economy in a planned way, and promote socialist modernization.
Article 2
"Quality of product" refers to the requirement for the applications,
safety and other properties of the products stipulated in related laws and
regulations, quality standards and contracts.
"Quality responsibility for products" refers to the responsibility that
shall be born due to the product's failure to satisfy the above-mentioned
requirements, which leads to loss on the part of the customer.
Article 3
The national standardization department is responsible for drawing up the
unified national standards. The national standards shall not be lower than
the international standards. National standards may be classified and
graded. The competent authorities responsible for the enterprise shall fix
a time limit for achieving the highest grade of the national standards.
The price department of the Central Government shall fix the prices
according to the grades of standards and implement the principle of "price
according to quality".
Article 4
Those enterprises engaging in the production, storing, transporting and
marketing of the product must, in accordance with the stipulations of the
present Regulations, undertake the quality responsibility for the
products.
The various departments, various localities, especially the competent
authorities for the manufacturer must exercise strict control over the
quality of the products, supervise and see that the manufacturer concerned
abides by the principle of "quality first", with a view to guaranteeing
the quality of product and undertaking quality responsibility. Those
failing to exercise effective control and supervision shall also undertake
liability arising therefrom.
Article 5
Quality-supervision agencies and the industry and commerce administration
departments must keep supervision over the quality of product and protect
the interest of the customer.
Article 6
The quality certificate, manuals, "high-quality" sign and identity sign of
a product must all be in conformity with the actual quality level of the
product. The explanation in the advertisement of the product must conform
to the actual quality of the product.
Article 7
All the manufacturers and the marketing firms must observe strictly the
following rules:
(1) unqualified product is forbidden from being dispatched from the
factory or marketed;
(2) unqualified raw materials and parts and components are not allowed to
be put into production or be used for assembly;
(3) it is forbidden to manufacture the products whose elimination the
State has explicitly ordered;
(4) product without the product-quality standard or without being tested
by the state quality-testing organ is not allowed to be manufactured and
marketed;
(5) it is forbidden to plot frauds, to pass of unqualified product as
qualified, to forge trademarks, or to imitate the famous brand products.
All the manufacturers and marketing firms are not allowed to sell their
products by way of coupling-sale.
Chapter II Quality Responsibility of the Product Manufacturer
Article 8
The manufacturer of the product must make sure that the quality of the
product conforms to the requirements laid down by relevant laws and
regulations, quality standards and stipulations of the contract.
The manufacturer of the product must set up a strict, well-coordinated and
effective quality-guarantee system, with a view to fixing the quality
responsibility for the product in an explicit manner.
The manufacturer must see to it that the quality-inspecting organ can
independently perform its functions of supervision and testing. It is
strictly forbidden to retaliate against the quality inspectors.
Article 9
The product shall not leave the factory unless it satisfies the following
requirements:
(1) achieving the quality requirements stipulated in Article 2 of the
present Regulations, and obtaining the quality certificate of the product
issued by testing organ and testing personnel;
(2) having the written explanation of, according to specific
characteristics, the product's name, size, model, ingredients, the
percentage of the ingredients, weight, direction for applications, lot No.
of production, date of production, name of manufacturer, address of the
manufacturer, and the serial number of the technical specifications of the
said product; explicitly specifying the date of expiry in case of a
product with time limit of efficacy. "High-quality" product must bear the
mark thereof;
(3) having the serial number, date of approval and the term of validity of
the production licence in case of a product manufactured under the
production licence system;
(4) machinery, equipment, devices, apparatus and durable consumer goods,
apart from satisfying the requirements in Items (1), (2) and (3) of this
Article, shall be accompanied with detailed instructions on the use of the
product. The content thereof includes: the product's technical-economic
parameters, service life, range of application, term of guarantee, methods
for installation, methods of maintenance and conditions for storing, term
of technical maintenance and repair, and other effective data concerning
the design parameters of the product. Electric products shall be attached
with the circuit diagram and schematic diagram;
(5) the package must conform to the related state regulations and
standards. As regards the products that are drastically poisonous,
dangerous, fragile, can not be laid on by heavy load, needing protection
against moisture, can not be turned upside down, there must be, on both
the external and interior packing, obvious indication marks and notices
for storing and transportation. On the package of the product, there must
be noted explicitly the actual weights (net and gross);
(6) on the product or the package thereof on which the trademark and
quality classification and grading system is applied, there shall be signs
for the said trademark, classification and grading;
(7) conforming to the requirements of the state laws and regulations
concerning safety, hygiene, protection of environment and measuring.
Article 10
The "substandard" goods that fail to achieve the requirements of the
related state standards, but still have some use value, cannot be marketed
at reduced price until having obtained the approval from the competent
authorities of the manufacturer; and on the package there must be clearly
marked with the words of "substandard goods". Products that fail to meet
the requirements of the state laws and regulations concerning safety,
hygiene and environmental protection and measuring must be destroyed or
undergo necessary technical treatment in good time. They are not allowed
to enter the market in the name of "substandard goods".
"Substandard goods" are not allowed to be used to manufacture or assemble
market-oriented products.
Article 11
Within the guarantee period of the product, in case of the quality found
out of line with the requirements stipulated in Article 2, the
manufacturer shall, according to the following different circumstances,
undertake the quality liability to the customer and marketing firm:
(1) the common part or component loses efficacy and therefore, after being
replaced, the performance can immediately be restored; in this case, the
manufacturer shall be responsible for replacing with qualified parts or
components and for restoring the normal performance;
(2) in case that the main part or competent of the product has lost the
efficacy and cannot be repaired within the set period, the manufacturer
shall be responsible for replacing with qualified products;
(3) in case the major function fails to satisfy the requirements of
Article 2 due to such causes as designing and manufacture, if the customer
requires to return the goods, the manufacturer shall refund;
(4) in case of economic loss caused by the quality faults, the
manufacturer shall also compensate for the actual loss;
(5) if maintenance and repair service or marketing firm responsible for
the aftersale technical service, so required and manufacturer must,
according to the contract of aftersale service, supply sufficient standby
products, spare parts and necessary technical support.
Chapter III Quality Responsibility of Enterprises for Storing or Transporting the Product
Article 12
The enterprises which undertake to store, transport, load or unload the
products must conduct the work of the storing, transportation, loading and
unloading in compliance with the relevant state stipulations and the
storing-transporting requirements indicated on the package of the product.
Article 13
In the course of the product entering the warehouse for storing or leaving
the warehouse, undertaking to transport the product or handing over the
product, the enterprise that stores or transports the product shall
observe the pertinent state stipulations and the storing-trans-system of
handing-over and checking before acceptance, so as to define the quality
responsibility. In case it has been testified that the damage of the
product is due to the cause of storage, transport or loading and
unloading, the enterprises which store, transport or load and unload the
product shall bear their respective liabilities and, according to related
government regulations, compensate for the economic loss.
Chapter IV Quality Responsibility of the Marketing Firm of the Product
Article 14
When laying in a stock of merchandise, the marketing firm shall, before
acceptance, test the product, so that the quality responsibility can be
clearly defined. The products sold by the marketing firm must conform to
the requirements stipulated in Articles 7 and 9 of the present
Regulations.
Article 15
In case the product sold by the marketing firm is found not up to the
conditions stipulated in Article 2 within the period of guarantee, the
marketing firm shall be responsible for guaranteed repairing, replacement,
taking back the product and refunding, and undertaking the responsibility
of compensating for the actual economic loss.
Chapter V Supervision and Control over the Quality of Product
Article 16
The various quality-supervising agencies shall, in accordance with the
relevant regulations of the state, organize independently, or together
with the industry and commerce administrative authorities, the responsible
departments of the various trades, and the responsible departments of the
various manufacturers, regular supervisional sample-checking on the
various links such as manufacture, storing, transportation, and marketing,
and regularly publicize the result of the testing of the samples.
Enterprises must honestly furnish the samples for checking and provide
facilities with respect to the testing means and working conditions.
Unless otherwise stated in state regulations, it is not allowed for the
quality-supervising agencies to collect fees from the enterprises for
sample-checking on the product, so as to guarantee the impartiality of the
supervising agencies. The expenses needed for the technical means and
measures and for the test by the quality-supervising agencies shall be
covered by the state or local financial allocations according to the
actual needs.
The economic commission at various levels are responsible for leadership,
organization and coordination of the supervision and control over product
quality.
Article 17
Responsible departments of the trades and responsible departments for the
enterprises at various levels are responsible for the control over the
quality of products in the respective trades within their authorization,
which covers: formulating or taking part in the formulation of the quality
standards for the products in their respective areas of responsibility and
the pertinent rules and regulations, being responsible for supervision and
control over the quality of products, urging the enterprises to ensure the
quality of product, perfecting the quality guaranteeing system, and
organizing the issuance of production licences.
Article 18
Exercise social supervision over the quality of product. The customer can
make inquiries about the quality of the product at the manufacturer, the
enterprises for storing and transporting, and the marketing firms; and the
social associations and organizations can help the customers participate
in the mediation, arbitration over quality disputes, and support the
customers to file lawsuits with the people's court.
Article 19
The customer can, according to the mutual agreement between the customer
and manufacturer, send his representative to the manufacturer to conduct
on-the-spot-supervision over the process of the production and the quality
of the product.
Chapter VI Settlement of Disputes over Quality Responsibility for the Product
Article 20
Any dispute arising from the quality of product shall, provided there is
an economic contract, observe the relevant stipulations in the Economic
Contract Law. In the absence of such contracts, either party to the
dispute can refer the dispute to a relevant quality-supervising agency for
mediation or settlement, or take the case to the people's court.
Article 21
In case of any dispute over the data of technical testing of the quality
of product, the party concerned or the mediating or arbitrating agencies
can entrust legally designated quality-testing unit for arbitral testing;
and the said quality testing unit shall be responsible for the data of the
arbitral testing.
Article 22
Unless otherwise stipulated by the government, the request for arbitration
or prosecution over quality responsibility shall be raised within one year
from the date the party concerned is aware of or should be aware of his
interest and rights being damaged. Where the party bearing the quality
responsibility for the product is willing to bear the responsibility, it
is not limited by the term of validity.
Chapter VII Penalties
Article 23
Where the product of an enterprise fails to reach the state-stipulated
standards, the competent authoritative department of the said enterprise
shall order the enterprise to rectify production within a fixed period.
Where the said rectification within the fixed period turns out to be of no
effect, the competent authoritative department of the said enterprise
shall order it to stop production or switch over to a new line of
products, or even suggest that the relevant authorities revoke the
production licence and the business licence. In the period of
rectification, the competent authoritative department responsible for the
said enterprise may, according to different circumstances, deduct the
bonus and wages of the executive members of the enterprise and of the
staff and workers.
Article 24
Where the manufacturer or marketing firm has committed one of the
following acts in violation of the stipulations of the present
Regulations, the authoritative department responsible for the enterprise
or firm shall mete out disciplinary punishment to the responsible persons
of the enterprise and to the persons bearing direct responsibility; and
the industry and commerce administrative organ shall confiscate all the
illegal income, and impose on it a fine equivalent to 15% to 20% of the
illegal income according to the degree of seriousness of the case; or even
the legal liabilities shall be fixed by the judicial organs through due
investigation.
1. manufacture or market adulterated product or imitated product, or pass
off "substandard" product as qualified;
2. manufacture or market products without indicating the name and address
of the manufacturer;
3. manufacture or market products without quality certificate;
4. manufacture or market products of which the State has issued explicit
order for their elimination;
5. manufacture or market the products on which the State adopts the system
of production licence, but fails to renew the said production licence
after its expiry;
6. manufacture or market products manufactured or assembled with
unqualified raw materials, parts or components;
7. manufacture or market products in violation of the requirements
stipulated by state laws and regulations concerning safety, hygiene,
environmental protection and measuring;
8. market products which have passed the expiry date.
The incomes collected from fines shall be handed to the state treasury.
Article 25
In the course of sample-check on quality supervision, in case it is found
that the manufacturer or marketing firm has committed the act(s) listed in
Article 24, the quality-supervising agency shall treat the case according
to the stipulation in Article 24. As regards the product not in conformity
to the provision of Item (7) of Article 9 of the present Regulations, the
product shall be destroyed on the spot by the quality-supervising agency
or be given the necessary technical treatment; and the manufacturer and
the marketing firm shall be ordered to recover within the given time all
the substandard products that have already been sold.
In case of violation of the stipulations in Article 8 of the present
Regulations, or retaliation against quality-testing personnel, or the
working personnel in quality-supervising and quality-testing agencies act
wrongly out of personal consideration, the responsible authoritative
department shall mete out disciplinary punishment. As regards those of
extraordinary seriousness, criminal liabilities shall be investigated and
fixed according to law.
Article 26
Where the poor quality of the product has resulted in the injury or death
of the customer, and in his loss of property, hence violating the criminal
code, the judicial organs shall investigate and fix the legal liability of
the party concerned.
Article 27
The above-mentioned penalty does not acquit the party bearing the quality
responsibility of its responsibility for the guaranteed repair,
replacement, recovering the product with the money already paid, and the
compensation for the actual economic loss to the customer(s).
Chapter VIII Supplementary Provisions
Article 28
The relevant responsible authorities may, in line with the provisions of
the present Regulations, work out the implementing details. The quality
responsibility regulations for import & export products, for goods with
military application as well as goods for special requirements, the
relevant authorities may, with reference to the principles of the present
Regulations, enact separate specific regulations.
Article 29
The present Regulations apply to all enterprises with ownership by the
whole people, enterprises with ownership by the collective, individual
industrial and commercial operators as well as the Chinese-foreign equity
joint ventures, contractual joint ventures, and foreign-capital
enterprises.
Article 30
The State Economic Commission is authorized to interpret the present
Regulations.
Article 31
The present Regulations shall go into force on July 1st, 1986.
